Projects & Case Studies
Examples of our noise and vibration measurement and consulting work — every project measured with calibrated Class 1 instruments and reported to a standard you can rely on.
Hotels & Real Estate
Resolving room-to-room noise complaints in a 5-star Bangkok hotel
A central Bangkok hotel faced repeated guest complaints about noise between rooms. We measured the real sound insulation of walls and floors, located the leakage paths, and specified fixes with verifiable targets.
Industrial / EIA
Factory boundary noise measurement for EIA compliance
A manufacturing plant in an industrial estate needed boundary noise and nuisance-noise measurements under its EIA conditions. We planned the measurement points, collected 24-hour data, and delivered a report accepted by the regulator.
Construction / Vibration
Continuous vibration monitoring for piling next to a heritage building
A construction project adjacent to a sensitive older building required continuous vibration monitoring with real-time alerts, letting works proceed without damage or dispute.
Offices / Fit-out
Designing and commissioning open-plan office acoustics to international criteria
A new headquarters needed an open plan that actually works and meeting rooms that keep conversations confidential. We set the acoustic criteria, measured during fit-out, and commissioned before handover.
Entertainment venue / Acoustic camera
Finding where a live-music venue leaks sound, with the acoustic camera
A live-music venue in Chonburi needed to know which parts of the building envelope were letting sound out before spending on remediation. We scanned 12 positions around the building with the 128-microphone acoustic camera during a real performance and identified two leakage paths out of twelve: a door that did not seal, and a vibrating roof panel.
Automotive plant / Noise-control simulation
Ranking eight noise-control measures for a press line before the purchase order
An automotive plant on the Eastern Seaboard had a list of eight noise-control measures for a stamping press line and wanted to know what each would deliver before ordering. We measured, located the sources with the acoustic camera, and simulated all eight measures cumulatively in SoundPLAN. The first four on the list added up to less than 3 dB at the operator positions; the absorption panels, roof cover and front cover were what delivered 10–11 dB.